9 Years

of experience

Opening Walls and Reinforcing Frames for Better Layouts

NCG Construction Group, LLC handles structural renovations for homes in Odessa, Florida.

Your home in Odessa has walls that divide the kitchen from the living room, or a hallway that cuts through what could be a larger, more open space. Structural renovations remove or modify load-bearing walls and reinforce the framing so you can reconfigure the layout without compromising the integrity of the house. This work is common during kitchen remodels, room additions, and large-scale renovations where the existing floor plan no longer fits how you live.

NCG Construction Group, LLC coordinates with engineers to determine which walls carry weight, what type of beam or header is needed to support the load, and how the framing must be reinforced once the wall is removed. The crew installs steel or engineered wood beams, adds temporary supports during the work, and ensures that everything meets local building codes in Odessa. The result is a home with a new layout that is structurally sound and ready for the next phase of construction. This service is often paired with kitchen remodels or expansions where opening up the space is the only way to achieve the design you want.

Reach out to NCG Construction Group, LLC to discuss structural modifications for your Odessa property.

What Happens When a Load-Bearing Wall Is Removed

The crew begins by identifying all load-bearing walls in your Odessa home, which requires looking at the foundation, floor joists, and roof structure to see how weight is distributed. Once the wall to be removed is confirmed as load-bearing, temporary posts are installed to support the ceiling while the wall is taken down. A steel or laminated veneer lumber beam is cut to size, lifted into place, and secured to the framing on either side of the opening. The beam transfers the load from the ceiling and roof down to the foundation, eliminating the need for the wall.

After the beam is installed, you will see an open space where the wall used to be, with no sagging ceilings or cracks in the drywall. The floor plan feels larger, sightlines extend from one room into the next, and you can arrange furniture or cabinets in ways that were not possible before. The framing around the beam is finished with drywall, and the new opening is ready for paint or trim. The structure remains solid because the load has been redirected through the beam rather than eliminated.

This service does not include drywall finishing, flooring, or electrical work beyond what is required to expose the framing. If walls contain plumbing or HVAC ducts, those systems must be rerouted before the wall can be removed. The focus is on modifying the structure safely and in compliance with engineering requirements and local building standards. Once the renovation is complete, the home is ready for the rest of the remodel.

Common concerns about changing a home's structure

Homeowners in Odessa often want to know whether a wall can be removed, how much it will cost, and whether the work requires permits. These questions help you understand what is involved before committing to a structural renovation.

How do you know if a wall is load-bearing?
Load-bearing walls typically run perpendicular to floor joists and sit above foundation walls or beams. NCG Construction Group, LLC inspects the framing and works with an engineer to confirm before any demolition begins.
What type of beam is used to replace a load-bearing wall?
Steel beams or engineered wood beams like laminated veneer lumber are common. The size and type depend on the span of the opening and the weight the beam must support.
When is a permit required for structural work?
Any modification to a load-bearing wall in Odessa requires a permit and inspection to confirm that the work meets building codes. NCG Construction Group, LLC handles the permit process and coordinates inspections.
What if the ceiling sags after the wall is removed?
That means the beam was not properly sized or the load was not supported during the work. When done correctly, the ceiling remains level because the beam transfers weight directly to the foundation without deflection.
Why does structural renovation cost more than other remodeling work?
You are paying for engineering, temporary supports, heavy beams, labor to install them safely, and permit fees. The work also requires more time and precision because mistakes affect the entire structure.

NCG Construction Group, LLC works with homeowners in Odessa who want to change the layout of their home without guessing whether the structure will hold. If you are planning a renovation that involves removing walls or opening up rooms, contact the team to review your options and coordinate the engineering and construction work.